Installation was very simple and took just a few minutes.
What I like most is how well they match the existing chrome trim on the truck. They look like they came that way from the factory. The quality of the plastic feels solid, and the chrome coating looks smooth with no imperfections.
These door handle chrome covers are easy to install. They look like chromed metal handles. The most difficult part of installing is removing the red tape that protects the glue. Very satisfied.
I received the oil pan and checked it over, and the overall construction looks solid. The pan feels sturdy, the finish is clean, and the included drain plug is a nice convenience. The mounting area and threads look well made, with no obvious defects or damage out of the box.
Overall, this replacement oil pan is a decent value for the price. The casting quality is acceptable, but it does require some preparation before installation.
Some machined edges were quite sharp, so I recommend deburring the perimeter, inside edges, and openings before installation. There was also a light protective film inside the pan that should be cleaned off with a degreaser such as brake cleaner.
The pan came with a drain plug, but no gasket was included, so you’ll need to source one separately before installation. The fit appears correct, but make sure you have all required hardware ready beforehand.
I also noticed some minor porosity in the aluminum casting. I did not find any leaks or critical issues on my unit, but it’s something to keep in mind compared with an original factory part.
For the price point, this replacement pan offers good value and can be a practical option for a repair or replacement project. Just take the time to properly prepare and inspect it before installation.
Store owner replied:
Thank you for your detailed feedback. We’re glad to hear the oil pan provided good value and fit your repair project. We appreciate your installation suggestions and will continue working to improve our product quality and customer experience. Thank you for choosing AUCERAMIC!
The pan has a flat surface that you need a flat gasket or silicone sealant to install. Usually the silicone sealant will rub off trying to install. The narrow space between the transmission and oil pump WILL take the silicone sealant off. The flat Gaskets from auto parts stores will NOT fit. I tried Fel-Pro gasket and it didn’t fit. The oil pan does NOT have a magnetic plug, go aftermarket for a aftermarket magnet plug and make sure you have the right size.
Store owner replied:
Thank you for sharing your detailed installation experience. 🙏 We appreciate your feedback regarding gasket selection and installation clearance, as these details are important for a successful repair. We’ll continue improving our product information and customer support to help provide a better experience. 🔧 Thank you for choosing AUCERAMIC!
This replacement oil pan for an 8th Gen Accord appears to be well constructed and looks just like the OEM. It hasn't been installed yet since my daughter has the vehicle at college right now. I also like that includes a new oil plug as well, I just wish it included the gasket.
Store owner replied:
Thank you for your review! 😊 We’re glad to hear that the oil pan looks well constructed and matches the OEM-style design. We’re also happy that the included drain plug was a helpful addition. 🔧 We appreciate your suggestion about including a gasket and will keep it in mind as we continue improving our products. Thank you for choosing AUCERAMIC! 🙏
These mirror caps fit my chevy tow mirrors surprisingly well. The chrome finish looks clean and shiny, and they really freshened up the look of my truck. Installation was straightforward and they snapped into place without any issues. For the price, the quality exceeded my expectations. They've stayed secure and still look great after driving in different weather conditions. I'd definitely recommend them if you're looking for an affordable way to upgrade your tow mirrors.
Store owner replied:
Thank you for your great review! 😊 We’re happy to hear that the mirror caps fit your Chevy tow mirrors well and gave your truck a fresh new look. 🚙✨ It’s great to know the installation was easy and the chrome finish has held up well in different conditions. We truly appreciate your recommendation and your support of AUCERAMIC! 🙏
I didn’t think these covers would make that much of a difference but the title of my review says it all! Wow! The chrome truly complements the Tundra and makes it really stand out! The covers themselves were easy to install and fit snugly over the rear view mirrors . It comes with adhesive on the covers so all you have to do is peel the tape and snap on. You will love these!!!! I feel like I have a brand new truck!!!!!
Store owner replied:
Thank you for the amazing review! 🤩 We’re thrilled to hear that the chrome mirror covers gave your Tundra a fresh new look and exceeded your expectations. 🚙✨ We’re glad the installation was quick and the fit was secure. Your satisfaction and support mean a lot to us. Enjoy your upgraded truck, and thank you for choosing AUCERAMIC! 🙏
They came in on time. I let him sit in the sun for a few minutes where they got nice and hot for the glue to get nice and warm so they would stick better. Easy to install.
Store owner replied:
Thank you for your review! 😊 We’re glad to hear the mirror covers arrived on time and the installation was quick and easy. ☀️ Your tip about warming the adhesive before installation is very helpful for other customers as well. We appreciate your support of AUCERAMIC! 🙏
Perfect Fit!!!
2005 Mini Cooper S (R53) Better and cheaper than OEM. Part is built using cable rod instead of fibre/plastic. Length is spot on. Reads well and clearly.
Fits a 2010 Silverado perfectly. Literally felt the difference the second I started the engine once it was installed because my original had developed a hole after the MAF sensor. Only about 20 minutes total to take out the old one and put this one in. Great product!
They look good from about 10 feet away. Fit isn’t great, but for the price I am satisfied. I do wonder how long the tape hold up to washing. Will update after a few months.
As an amateur home mechanic, tackling a timing belt job is never fun, but having a complete, quality kit makes all the difference. This kit for the Ford 1.6L DOHC is truly comprehensive and offers excellent value compared to picking up all these parts individually at the dealership.
The Gasket/Seal Inclusion is Key!! It's not just a belt and a pump. The fact that they include the crucial camshaft and crankshaft seals (and the water pump gasket, obviously) is a huge bonus. Anyone who has done this job knows that the most common reason for having to go back into the engine bay shortly after is a leaking seal. Having high-quality replacements right in the box eliminates that risk and saves an extra trip to the parts store.
The water pump casting looked clean, and the impeller was well-finished. The tensioner pulley felt smooth and robust—no cheap plastic feel here. These are the parts that typically fail prematurely, so I appreciate that they didn't skimp on the critical components.
Installing this kit without the right parts is borderline impossible. This kit provides the necessary parts, but the mechanic provides the necessary precision. This is a fantastic 'one-stop' kit that provides everything you need to execute a full, proper timing belt service on your 1.6L Ford engine. The quality and completeness of the kit give me confidence that the car is good for another 100k miles. Highly recommend for the DIY mechanic!
The oil pan appears solid and well constructed, with an included drain plug that makes oil changes easier. Replacement oil pans like this are typically aluminum with a wet-sump design, similar to the factory part, and help maintain proper oil levels and engine lubrication.
Fitment is straightforward if matched to the correct vehicle, and it works well as a cost-effective alternative to OEM parts. Installation is standard for oil pan replacements and may require mechanical experience.
Overall, this oil pan offers good compatibility, solid function, and affordable value, making it a dependable option for restoring proper engine sealing and preventing oil leaks.
This air intake hose was a little snug getting it on but I guess thats good knowing it won’t be coming off easily. I did need to add a little lubricant to get it on. It feels well made and fit my 2006 Acura TSX perfectly. No complaints.
This kit is perfect for your 2015 GMC Silverado. We all know that maintenance is key for older cars. If your GMC truck is getting up there in mileage, this comprehensive kit is perfect for you. Comes with everything you need to complete the timing chain and tensioner maintenance. This is a well-engineered kit and a great value. I would definitely recommend this product for your GMC truck.
This is an excellent replacement for the original Honda oil dipstick. I broke off the handle of my dipstick when I was working on the engine. The first few pictures show how I removed the old one with pliers. The remaining photos show the new dipstick, which is a good quality replacement.
This is the 2nd one I have made. I painted the bottom,back,and sides black to have it a little different than the first one. The sound is good the remote it good because you can change the eq settings
Looks and fits great. Installation was easy, but I had to do a little trimming on the bottom pieces so they would fit perfectly. All and all they look great and seem like good Quality. Definitely a upgrade to the appearance of my truck.
Perfect Fit 2008 Toyota Sequoia
These mirror covers are incredibly easy to install, they are a perfect snug fit and gives your car a nice updated look. The quality is nice and is a great value. To install you peel off the adhesive strips and fit over the top of your original mirror.
Installed this transmission oil pan kit on my wife’s Durango without any issues. Everything fit as expected—the gasket, drain plug, and bolts all lined up perfectly. Solid quality for the price and made the fluid change much easier. So far, no leaks and seems very reliable.
Bought for my Daughter's 1998 E36 328i Convertible. Great fit. Came with extra bolt washers which was nice. I recommend using Permatex 81158 Black Silicone Adhesive Sealant to assure a good bonding
Fit perfectly one thing tho it was missing an hole for a piece that it had for the part but it was bord all the way through but it worked regardless. Car is so much quieter and smooth running. Value for the money is great! Functionality it fit perfectly. Ease of installation, took under 10 minutes to install. Quality is nice felt strong but yet pliable.
2008 Ford Mustang v6 4.0L. Excellent.
Perfect fit, easy install to the valve cover. You might have to play some of the grommets in place but other then that the gasket fit just right on my 2008 Mustang V6 4.0L.
This dipstick is well-made, with a plastic handle to prevent burns and a high-quality Viton o-ring (better than nitrile). I appreciates its stiffness, preferring it over more flexible versions like Cravenspeed’s dipstick. It arrived slightly bent due to packaging, but was easy to straighten. The oil level reading is easy to see. It was accurate compared to the audi internal reading.
Good quality intake tube. It was direct replacement for my old hardened and cracking intake.
The intake tube on my Accord hardened over the years, and I broke a connector off while doing some cylinder head work. This was a good quality replacement. Directly replaced my old one in a few minutes. Two thumbs up.
My old accord had a broken connector and it was split in two. Got this replacement and it is an exact match. The only thing different was the additional port that is available. Must be for a different model of car that has an additional hose that connects. That option is factory sealed, so no issue with my car. The hose slid on tightly on both ends. and the spring around the hose on the air cleaner end was tight and held on the hose with no need for a clamp. The other end that goes into the throttle body has a hose clamp and it makes a very tight connection. Very well packed with two or three wraps of bubble wrap, so it arrived in perfect condition. Exact fit for my old car.
The plug is a little different but the length is basically identical. The dipstick steel is slightly more flexible than OEM but is one continuous piece. Works just fine. Good price.
I purchased these valve covers for my 2015 Lincoln Navigator 3.5L Ecoboost. My oem covers were worn out, gaskets were brittle, oil leaked down and smoked on my exhaust manifold. Found these and problem solved! They fit perfect, came with all the seals installed, which is a huge time saver over buying just a seal kit. They look exactly like OEM. Once I removed the old covers (be patient, take your time), these new ones snapped right in place. One small note, I reused my bolts from my old cover (they just tap out) and put them on this new cover. Because I snapped two when torquing to spec, figured they had some defect, so I was not chancing any more. Even with that, five stars. The seals fit perfect around my spark plugs. They are solid and well made.